Home Products Our Technology  Applications  Downloads 24 hr support

Cables
 

Serial Cable - CBLSER DB9
 

Coaxial Cable - CC3 SMA/CC10 SMA/CC20 SMA
 
The CBLSER DB9 is a RS232 serial cable used for all Crouse-Hinds telemetry products, allowing connection to our computer or laptop RS232 port, for diagnostic and configuration purpose.

This high quality cable fitted with a molded DB-9 male and DB-9 female connector. These connectors are straight through. 		The Crouse-Hinds antenna coaxial extender kits are designed for use with the Crouse-Hinds telemetry modules. The CC3 SMA is approximately 10’ long (3m), the CC10 SMA is approximately 33’ long (10m) and the CC20 SMA is approximately 66’ (20m) long.

All are terminated ready for use with a SMA male and N-type male connector. The SMA connector is provided for direct module connection and the N-Type connects directly to the antenna tail lead.
 

Serial Cable - CBLSER RJ45
 

A53649A
 
The CBLSER RJ45 is a RS232 serial cable used for the D2 W LR and D2 W LT Crouse-Hinds telemetry products, allowing connection to a computer or laptop RS232 port, for diagnostic and configuration purpose. This high quality cable fitted with a molded RJ45 male (Ethernet connector) and a DB-9 female connector. This cable is ideally suited for use with the Division 1 antenna (D1 NW ANT 1 900)
 

CC900TAIL
 

Ethernet Cable - CBLETH C5X
 
The CC900TAIL is a 24” (800mm) RG58 coaxial lead. The tail is terminated with a SMA (male) connector for module connection and a flanged N-Type (female) bulkhead connector.

The CC900TAIL is used as a flexible connection within electrical enclosures that require connecting to a low loss coaxial cables such as LDF4. This kit provides a simple solution to coaxial extensions that require a N-Type (male) connections. The coaxial cable is terminated and tested alleviating time consuming field termination work.
 		 A short coaxial cable is available for use between any Ethernet Gateway radio and PC or network router, switch or hub.
  • Signal Loss: 1dB (900 MHz)
  • Length 3m, 5.1 mm outside diameter.
  • The cable is terminated with an N-type male connector at the antenna end of the cable, and an SMA male connector at the radio end of the cable.