2.4 GHz Antenna
|
|
Antennas are being added to the line for use with the 2.4 GHz Wireless Ethernet Modem. Please consult Crouse-Hinds when choosing an antenna for these units. |
| |
2.4 GHz Collinear Antenna (SG2400EL)
|
2.4 GHz Collinear Antenna (MD2400EL)
|
- 5.1 dB gain
- Designed for use with the Crouse-Hinds CC10 SMA, or CC3 SMA coaxial cable extender kits.
- At data link 2.4 GHz frequencies, it is important to keep cable runs to the shortest length possible. Where a long run is unavoidable, then a suitable low loss cable such as RU400 should be used.
- Mounting brackets and hardware provided
- Connector: N-Type (female)
- Height 55 cm
- Impedance: 50 Ohms
|
 |
- 3 dB gain (incl cable)
- Approximately 15 feet (5m) of low loss RG58 coaxial cable is terminated with a male SMA connector.
- Mounting brackets and hardware provided
- Length 23 cm
- Impedance 50 Ohms
|
 |
2.4 GHz 18 Element Yagi Antenna (Y2400 18EL)
|
2.4 GHz Collinear Antenna (Z2400EL)
|
- 18 dB gain
- The (CC10 SMA/CC20 SMA) coaxial extenders are suitable for use with the Y2400 18EL.
- Connector: N-Type (female)
- Length 700 mm, Diameter 80 mm
- Impedance 50 Ohms
- Mounting brackets and hardware provided
|
 |
- 10 dB gain
- Impedance 50 Ohms
- Length 850 mm
- Connector: N-Type (female) build inside of mounting tube
- Mounting pole clamp included (304 stainless steel)
|
 |
2.4 GHz Demo Whip with SMA male (WH2400 SMA)
|
2.4GHz Division 1 Antenna (CTX 2400 TR)
|
- Nominal gain: 0dB
- Designed for short distances (50 feet or less) and for indoor applications only
- Connector: SMA (male)
- Length: 54 mm
- Impedance: 50 ohms
|
 |
- The CTX 2400 TR antennas are designed for use in “Hazardous-Classified” and Industrial- Hardened applications.
- The antennas are omni-directional with 2.0 dBi gain and designed for flexible mounting on a variety of explosion proof housings (with a ¾” NPT pipe thread).
- Omni-directional and designed for flexible mounting on a variety of explosionproof housings (with a 3/4” NPT pipe thread)
- Mounting base is made of heavy, nickelplated brass with an integrated TNC (female) coaxial connector for ease of installation with a (catalog number: A10832A) cable
|
 |
| |
| |
| |
| |
